luglugalugaaen |

sea nav gua

form

GET YOUR FREE QUOTE

We will contact you within 24 hours.

What Are The Globe Valves

Time: 3-July 2025 | Source: I-FLOW| Share

Ever found yourself wondering what type of valve you need to control the flow in a piping system? You’ve got ball valves, gate valves, butterfly valves—but what about globe valves? These might not be the flashiest in the lineup, but they’re the unsung heroes of throttling.

So, What Is a Globe Valve Anyway

Imagine a valve that doesn’t just open and close but also gives you fine-tuned control over how much fluid gets through. That’s what a globe valve does. It’s built with a disk (kind of like a plug) that presses down into a seat to reduce or stop the flow.
These valves are perfect when you need to adjust flow rate — not just shut things off. That’s why engineers love them for heating systems, chemical processing, and even steam control in massive power plants.

How Does It Work

Picture a traffic light for fluid. The disk goes up — green light, fluid flows. Lower it halfway — yellow light, controlled flow. Push it down all the way — red light, flow stops.
The valve’s path isn’t straight; it curves, which slows the flow and gives you the control you’re looking for. It’s not as quick as a ball valve, but way more accurate.

Meet the Globe Valve Variants

  • Straight (Z-type): Best for control, not for saving space.
  • Angle: Takes a turn — literally — great if you're working in tight corners.
  • Y-pattern: Less pressure drop, more efficient in high-pressure settings.

Why Pick a Globe Valve

  • Precision: Adjust flow exactly how you want.
  • Durability: Built tough for high-pressure systems.
  • Safe Shutoff: Reliable sealing even in challenging conditions.
  • Multi-fluid Friendly: Water, oil, gas — you name it.

But Heads Up…

  • More pressure loss than a gate or ball valve
  • Manual ones take time to open/close
  • Slightly pricier than simpler options

Where Will You Find Them

  • Power plants keeping turbines cool
  • HVAC units managing hot water flow
  • Oil refineries regulating high-viscosity fluids
  • Water systems in commercial buildings
  • Chemical plants needing tight control
Back To The List btn

Related News

What Can Go Wrong When Check Valve Fails
25-July 2025

What Can Go Wrong When Check Valve Fails

Most of us don’t think twice about check valves—until something goes wrong. These small devices quietly keep your system flowing in the right direction. But when a check valve fails, the effects can ripple through your entire setup.So, what actually happens?

View Details
How To Choosing The Right Valve
24-July 2025

How To Choosing The Right Valve

In the world of industrial flow control, not all valves are created equal—and choosing the wrong one can lead to system inefficiencies, breakdowns, or worse. Whether you’re an engineer, contractor, or purchasing manager, knowing what to prioritize when selecting a valve can save you headaches down the road.

View Details
How To Replace Shut Off Valve
22-July 2025

How To Replace Shut Off Valve

It always happens at the worst time. A leaky toilet tank, a dripping faucet, or worse—an unexpected flood. You reach for the shut-off valve under the sink... and it doesn’t budge. Or worse, it breaks off in your hand.That’s when you realize: a small valve has big responsibilities. Replacing a shut-off valve may sound like a plumber’s job, but with a little preparation and a few tools, it’s a DIY-friendly task that can give you long-term peace of mind.

View Details
How To Choose Right Gate Valve
16-July 2025

How To Choose Right Gate Valve

Choosing a gate valve sounds simple—until you realize there are dozens of materials, designs, sizes, and standards out there. Don’t worry. Whether you’re a contractor, engineer, or project manager, this guide will walk you through what matters (and what doesn’t) when picking the perfect gate valve.

View Details
Where Should You Put Check Valve
15-July 2025

Where Should You Put Check Valve

If your pump shuts off and water suddenly rushes back, or your air compressor struggles to hold pressure, you’re likely missing one small—but mighty—device: a check valve.This simple valve only allows fluid to flow one way and automatically stops it from reversing. But it works best when it’s installed in the right place.

View Details
How Does Pneumatic Butterfly Valve Actually Work
14-July 2025

How Does Pneumatic Butterfly Valve Actually Work

Imagine you're managing a large water treatment plant. You can’t afford to run around opening and closing valves by hand. You need speed, reliability, and automation. That’s where pneumatic butterfly valves come in—a smart, air-powered solution for managing fluid flow.But how do they work behind the scenes?

View Details